Loading...
Feature Improvement DMD2 Released Shipped in 4.048

OBD Support for KTM 690 (2009)

Submitted by Marcos Tapajos  •  #577  •  Oct 23, 2026  •  updated 10h ago

I'd like to request OBD data support for the 2009 KTM 690.

I'm aware that this is a pretty old motorcycle, so I understand that adding support for it might not be a priority or might require some extra work. However, the bike works well with TuneECU, which allows me to read several engine parameters, including RPM, TPS voltage, and other sensor data.

I understand that you probably don't have direct access to a motorcycle this old for testing, so I'd be more than happy to help with the development process. I can connect DMD to my bike, run any tests you need, and collect logs or other diagnostic data that could help you investigate the available parameters and implement support.

I'd love to see this bike supported by DMD2, and I'm happy to contribute my time and motorcycle to help make it happen.

Discussion (4)
J
Johny Pear 5d ago

Thanks for offering to help with your 2009 KTM 690. Your bike's ECU most likely talks over the older K-line wire, using KTM's own language instead of standard OBD-II, which is why DMD2 can't read it yet. The new DMD2 beta (1.0.111) can listen to it and record what it answers, so we can build the readout from your log.

  1. Which OBD dongle do you use? It has to support K-line (ISO 14230 / KWP2000): the DMD OBD M1 (vLinker FS), OBDLink and genuine ELM327 adapters do.
  2. The 690 has KTM's own diagnostic plug, not an OBD socket. Do you use an adapter cable from that plug to OBD (the one you use with TuneECU)?
  3. With the bike on the stand and the engine idling: Devices → OBD → Auto Debug, type "KTM 690 2009" as the vehicle note, and blip the throttle a few times while it runs (most of all at the "Probing the K-line ECU" step). Then send the report.

That's all we need.

M
Marcos Tapajos 5d ago

João,

My OBD dongle works fine with K-line. I use it with TuneECU on Android to read data and download/upload ECU maps. As you probably know, for this model year, the KTM has two ECUs. I use the OBD dongle together with the KTM adapter cable.

My bike is at my house in the mountains, and I'll be there the weekend after next. I'll send you the report then and let you know by adding a comment to this ticket.

Thank you for your help!

M
Marcos Tapajos 1d ago

João,

It was sent. Let me know if you need anything else

J
Johny Pear 10h ago

Thanks, Marcos, your report arrived. DMD2 tried every standard K-line connection on your 690, and neither ECU answered, so before the next try we need a few details:

  1. Which OBD dongle is it (brand and model, or a photo of its label)? Is it the same Bluetooth dongle, paired with the same tablet, that TuneECU uses?
  2. In TuneECU, once it is connected to the bike: what does it show for the ECU (its type or name, and the connection or protocol it uses)? A screenshot of that screen helps most.
  3. Do you plug the dongle straight into the KTM adapter cable, with nothing else in between?

The next DMD2 beta will try more ways to talk to the ECU. When it is out, one more Auto Debug run with the same note ("KTM 690 2009"), with the engine idling, is all we need.

0 Vote
Add to the discussion

Sign in with your DMD account to comment, vote and follow this item.

Sign in
Top